TOSHIBA MINI NOTEBOOK NB505-SP0160M

Release Notes

• After the update completes, the computer will automatically shut down or restart.
• Power on the computer if it is off.
• While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key to load setup defaults.
• Press the F10 function key to save settings and exit. The computer will automatically reboot.

Change History

• Version 1.10 - 2010-11-16
  • Initial production BIOS.

Change History

• Version 1.50 - 2008-06-30
  • Updated to the DMI N and J specifications.
  • Modified: CMOS SBF Suppress Boot Disp default setting.
  • Corrected: BIOS Setup hang issue.
  • Corrected: Windows XP CD Recovery shows a fail message.
  • Corrected: Not possible to run C test to a mapped network drive.
  • Corrected: YE DATA USB FDD can not boot.
  • Corrected Epson Scanner doesn't work after S4/S5/Reboot resume.
  • Added: New interface for identify buttons.
  • Added: Flashit command /s (shutdown) function.
  • Corrected: When Windows starts up from a cold boot, sound file playback is choppy.
  • Added: Support for Lid wakeup from S3/S4 in AC mode.
  • Added: Panel ID (LP154WX5-TLA2, LG LP154WX4-TLD2).
  • Added: Brightness table for LP154WX5-TLA2, LG LP154WX4-TLD2.
  • Corrected: Internal KB repeat speed does not change.
  Version 1.20 - 2008-03-18
  • Corrected: System powers on by itself (auto power on).

Change History

• Version 1.70 - 2008-09-25
  • Fixed: After the first reboot the Built-In-LAN doesn't work even though it has been enabled.
  • Updated the AMD 2008 CPU OSB logo.
  • Updated the DMI type 2 Manufacturer and Product name string.
  • Fixed: When the system is booted to a PXE-Linux Server, file downloads take a longer time.
  Version 1.50 - 2008-06-30
  • Updated to the DMI N and J specifications.
  • Modified: CMOS SBF Suppress Boot Disp default setting.
  • Corrected: BIOS Setup hang issue.
  • Corrected: Windows XP CD Recovery shows a fail message.
  • Corrected: Not possible to run C test to a mapped network drive.
  • Corrected: YE DATA USB FDD can not boot.
  • Corrected Epson Scanner doesn't work after S4/S5/Reboot resume.
  • Added: New interface for identify buttons.
  • Added: Flashit command /s (shutdown) function.
  • Corrected: When Windows starts up from a cold boot, sound file playback is choppy.
  • Added: Support for Lid wakeup from S3/S4 in AC mode.
  • Added: Panel ID (LP154WX5-TLA2, LG LP154WX4-TLD2).
  • Added: Brightness table for LP154WX5-TLA2, LG LP154WX4-TLD2.
  • Corrected: Internal KB repeat speed does not change.
  Version 1.20 - 2008-03-18
  • Corrected: System powers on by itself (auto power on).

Release Notes

• After the update completes, the computer will automatically shut down or restart.
• Power on the computer if it is off.
• While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
• Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

• Version 1.50 - 2011-03-01
  • 1. Fixed: System hangs when using the Intel Wireless LAN card to connect to the internet. Note: This update is not recommended for PLL50U-xxxxxx owners at this time because Intel Wireless LAN cards have not been used in NB500/NB505 models sold in the United States and Latin America.
  Version 1.40 - 2010-12-27
  • Fixed: HB116 WLAN card hang.
  • Added support for the Askey WB195 combo card - WLL6220B-D4.
  • EC-1.40: Modified the USB over current protection when the EC is in the deep sleep mode.
  • EC-1.40: Removed the low battery beep alarm.
  • EC-1.40: Modified Fn F9 behavior.
  Version 1.30 - 2010-11-25
  • Modified the battery gas gauge.
  • EC-1.30: Added AC adapter capacity information.
  Version 1.10 - 2010-11-16
  • Initial production BIOS.

Release Notes

• After the update completes, the computer will automatically shut down or restart.
• Power on the computer if it is off.
• While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
• Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

• Version 1.60 - 2011-03-16
  • Addressed a 3G card (F5521) POST time delay. Note: 3G models were not sold in the United States or Latin America.
  Version 1.50 - 2011-03-01
  • 1. Fixed: System hangs when using the Intel Wireless LAN card to connect to the internet. Note: This update is not recommended for PLL50U-xxxxxx owners at this time because Intel Wireless LAN cards have not been used in NB500/NB505 models sold in the United States and Latin America.
  Version 1.40 - 2010-12-27
  • Fixed: HB116 WLAN card hang.
  • Added support for the Askey WB195 combo card - WLL6220B-D4.
  • EC-1.40: Modified the USB over current protection when the EC is in the deep sleep mode.
  • EC-1.40: Removed the low battery beep alarm.
  • EC-1.40: Modified Fn F9 behavior.
  Version 1.30 - 2010-11-25
  • Modified the battery gas gauge.
  • EC-1.30: Added AC adapter capacity information.
  Version 1.10 - 2010-11-16
  • Initial production BIOS.

Release Notes

• After the update completes, the computer will automatically shut down or restart.
• Power on the computer if it is off.
• While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
• Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

• Version 1.70 - 2011-04-11
  • 1. Disabled ASPM L0s on Intel and other WLAN devices.
  Version 1.60 - 2011-03-16
  • Addressed a 3G card (F5521) POST time delay. Note: 3G models were not sold in the United States or Latin America.
  Version 1.50 - 2011-03-01
  • 1. Fixed: System hangs when using the Intel Wireless LAN card to connect to the internet. Note: This update is not recommended for PLL50U-xxxxxx owners at this time because Intel Wireless LAN cards have not been used in NB500/NB505 models sold in the United States and Latin America.
  Version 1.40 - 2010-12-27
  • Fixed: HB116 WLAN card hang.
  • Added support for the Askey WB195 combo card - WLL6220B-D4.
  • EC-1.40: Modified the USB over current protection when the EC is in the deep sleep mode.
  • EC-1.40: Removed the low battery beep alarm.
  • EC-1.40: Modified Fn F9 behavior.
  Version 1.30 - 2010-11-25
  • Modified the battery gas gauge.
  • EC-1.30: Added AC adapter capacity information.
  Version 1.10 - 2010-11-16
  • Initial production BIOS.

Release Notes

• After the update completes, the computer will automatically shut down or restart.
• Power on the computer if it is off.
• While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
• Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
• Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

• Version 1.80 - 2011-05-30
  • Added support for the Samsung LTN101NT07-T01 LCD panel.
  • EC: Added LTN101NT07-T01 Panel Settings.
  Version 1.70 - 2011-04-11
  • 1. Disabled ASPM L0s on Intel and other WLAN devices.
  Version 1.60 - 2011-03-16
  • Addressed a 3G card (F5521) POST time delay. Note: 3G models were not sold in the United States or Latin America.
  Version 1.50 - 2011-03-01
  • 1. Fixed: System hangs when using the Intel Wireless LAN card to connect to the internet. Note: This update is not recommended for PLL50U-xxxxxx owners at this time because Intel Wireless LAN cards have not been used in NB500/NB505 models sold in the United States and Latin America.
  Version 1.40 - 2010-12-27
  • Fixed: HB116 WLAN card hang.
  • Added support for the Askey WB195 combo card - WLL6220B-D4.
  • EC-1.40: Modified the USB over current protection when the EC is in the deep sleep mode.
  • EC-1.40: Removed the low battery beep alarm.
  • EC-1.40: Modified Fn F9 behavior.
  Version 1.30 - 2010-11-25
  • Modified the battery gas gauge.
  • EC-1.30: Added AC adapter capacity information.
  Version 1.10 - 2010-11-16
  • Initial production BIOS.

Change History

• Version 1.90 - 2009-06-12
  • Fixed: 3-cell Battery information is displayed incorrectly. (1.80)
  • Updated SLP 2.1

Change points from the last released version (2.1.40):

1. Fixed: Toshiba Service Station crashes causing the "Service Station has stopped working" error message.
2. Added Chinese translations.
3. Added code to downsize the TSS window when it is too large to fit in the display.

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
   1. If a User Account Control message is displayed, click Continue.
   2. Answer the displayed prompts to complete the installation.
   3. Restart the computer.

Change Points

1. Fixed: When connected to a wide screen monitor (16:9) and set to display from the external monitor only, the display rolls from left to right.

Install Instructions

1. Save the file to the Windows Desktop.
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Click OK, Unzip, then OK again.
5. Click Yes if a User Account Control Window is displayed.
6. Click Next at the Welcome screen.
7. Click Yes at the License Agreement screen.
8. Click Next at the Readme File Information screen.
9. Click Next after installation completes.
10. Select Yes, I want to restart this computer now then click Finish.

Version Verification

1. Right-click on the Windows desktop and click Graphics Properties.
2. Click the "i" icon at the top right corner of the window.
3. Verify that the Driver Version is 8.14.10.2330.

For PSLC0U or PSLE0U click here.

For PSLC8U, PSLC9U, or PSLE8U click here.

If you choose to manually upgrade, please download, print, and follow these detailed instructions. This document includes important details about Toshiba-supplied drivers and utilities that must be removed prior to running a Windows 7 upgrade, and Toshiba-supplied drivers and utilities that must be downloaded and installed after a Windows 7 upgrade is completed.

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

Changes in this update

1. This update fixes Security Vulnerabilities discussed in Toshiba Service Station Security Update.
   

   Installation Instructions

   1. Download and save this file to a convenient location such as the Windows Desktop.
   2. Save all work in progress and close open applications.
   3. Double-click the downloaded file TC00398200D.exe to start the installation.
   4. Press the Start button at the Toshiba Archive Extractor window.
   5. Press Yes if a User Account Control message is displayed.
   6. If Toshiba Service Station 2.1.14 is applied successfully, the message below will be shown.

This is a Bluetooth Stack for Windows by Toshiba update

Changes in this update

1. This update fixes Security Vulnerabilities discussed in Toshiba Bluetooth Stack Security Update.
   

   Installation Instructions

   1. Download and save this file to a convenient location such as the Windows Desktop.
   2. Save all work in progress and close open applications.
   3. Double-click the downloaded file TC00636200a.exe to start the installation.
   4. Press the Start button at the Toshiba Archive Extractor window.
   5. Press Yes if a User Account Control message is displayed.
   6. If Bluetooth Stack for Windows by Toshiba v9.10.32(T) is applied successfully, the message below will be shown. Click Yes to restart the system.

Change points:

1. Fixed: System crashes after login.
2. Improved package downloads by using the Binary Intelligent Transfer Service (BITS).
3. Combined the Download and Install buttons.
4. Added a Home Link to the Settings Page.
5. Removed the Notification Level Setting.
6. Deletes obsolete software - i.e. Software that was already downloaded and installed.
7. Notification message improvements.

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop
2. Save all work in progress and close open applications.
3. On the Windows Desktop, double-click the downloaded file to start the installation.
4. Answer the displayed prompts to complete the installation.