TOSHIBA SATELLITE PRO M10-S406

Change History

• Version 1.30    03-17-2003
  • Initial production BIOS for Satellite Pro M10.

Change History

• Version 1.50    06-13-2003
  • Made a change to prevent the message requesting an HDD password from appearing when the HDD is starting to fail.
  • Made a change to ensure CKE/CLK timing on cold boot to meet the specification from JEDEC.
  • Made a change to prevent the system from automatically shutting down immediately after resuming from hibernation when the AC adapter and a battery are removed and re-installed after executing hibernation suspend on Win98SE.
  • Made a change to prevent the displayed image from being stretched horizontally on WinNT4 when resuming from display auto-off by pressing a key.
  • Enabled wake up from USB mouse connected through HUB for USB 2.0
  • Ensured Ring wake-up on WinNT4 to be performed through internal modem.
  • Ensured to indicate password input dialogue on Win2k when resuming after warm-swapping from a DVD drive to an HDD with a password.

  Version 1.40    04-08-2003

  • BIOS was modified to enable the system to automatically identify W/O Common Dock model (PS630E-G2066) for TEG, from it's model number.
  • BIOS was modified to display Intel Logo a bit larger in size. The logo appears at the right bottom of the screen along with the Toshiba logo during start-up.
  • Corrected an issue where the Matsushita DVD Multi-Drive may fail to work properly when hot-plugged to the select-able bay.
  • BIOS modified for memory initialization specification from Intel to satisfy JEDEC SPEC when the following combination of memory modules is being used. (1) Slot A - 128MB - Slot B 512MB (2) Slot A - 128MB - Slot B 1GB (3) Slot A - 256MB - Slot B 1GB. After this modification, there will be no technical limitation on the insertion of a memory module with larger capactiy in slot "A".
  • For W/O Common dock model, return value of PnP Function 05h (Get Docking Station Information) has been changed to Function_Not_Supported.

  Version 1.30    03-17-2003

  • Initial production BIOS for Satellite Pro M10.

*1)Always use the wireless device in accordance with the cautions or notices described in the manual accompanied with your PC.

If an old version of this software is installed on the system, you must use Windows' Add/Remove Programs control panel to uninstall it before installing this release.

This release addresses these issues:

• Bluetooth PAN server cannot start automatically after resuming from standby, if OS is XP/TabletPC edition.
• One sentence in the option dialog of CHS is not correct.

Requirements

• Windows XP requires SP2
• Windows 2000 requires SP3 and Microsoft Hotfix Q818801

Limitations

• Fast user switch is not supported. Bluetooth Manager can not be launched when switched to another user.
• When using MS-FAX, please disable the "automatic reception setting". If it is enabled, it may take several minutes to initialize BT on resume from standby.
• Before connecting or disconnecting a Bluetooth headset, please exit any voice or sound-related applications (e.g. Windows Messenger, Windows Media Player). The audio input and output may not be switched properly if those applications are running. This same precaution is important prior to system standby, hibernate or shutdown, and prior to turning off or unpluging the primary Bluetooth device.

The Toshiba Bluetooth Monitor will turn on/off the Bluetooth module, allowing the Microsoft Bluetooth Stack in SP2 to install correctly. This module is not necessary when you use the Toshiba Bluetooth Stack.

If you want to use the Microsoft Bluetooth Stack instead of Toshiba's's:

1. Uninstall Toshiba Bluetooth Stack using the Add/Remove Programs control panel.
2. Install the Toshiba Bluetooth Monitor
3. Install SP2 (the Microsoft Bluetooth Stack will be installed).

For Tecra M1, this version is only applicable to Win98SE.

Requires either a bootable diskette drive (FDD), or bootable CD-ROM (CD-RW, DVD-ROM/RW). If no FDD is available, requires access to CD authoring (burning) software and hardware.

Build 60303 fixes an issue where Satellite 5205-S705 units were programmed with the incorrect DMI model string.