TOSHIBA SATELLITE LX0W-C32

SERVICE STATION

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

To open Service Station:

1. Click the Start menu.
2. Enter "Service Station" into the search field.
3. Click "Service Station" in the search results.
4. Service Station will open.

To enable / disable Service Station:

1. Click the "View Program Access Information" link located under "Last Update" in the lower Left corner.
2. Toshiba Service Station Access Information window will open.
3. To disable this application (not recommended) click the disable button. To continue using this application click the enable button.

SERVICE STATION

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

To open Service Station:

1. Click the Start menu.
2. Enter "Service Station" into the search field.
3. Click "Service Station" in the search results.
4. Service Station will open.

To enable / disable Service Station:

1. Click the "View Program Access Information" link located under "Last Update" in the lower Left corner.
2. Toshiba Service Station Access Information window will open.
3. To disable this application (not recommended) click the disable button. To continue using this application click the enable button.

PASSWORD UTILITY

This utility adds additional password security to your Toshiba computer. After registering a user password, you will be required to input it when booting the computer or starting the Password Utility. Refer to your Owner's Manual for complete details.

To open the Password Utility:

1. Click the Start menu.
2. Enter "Password" into the search field.
3. Click "Password Utility" in the search results.
4. The Password Utility will open allowing you to set, delete or change the password.

• Set password will regsiter a user password with the computer.
• Delete allows you to delete the regsitered user password.
• Change allows you to change the regsitered user password.

When setting a password, you can apply it to the HDD. For information about this feature, click on "Learn More...".

PASSWORD UTILITY

This utility adds additional password security to your Toshiba computer. After registering a user password, you will be required to input it when booting the computer or starting the Password Utility. Refer to your Owner's Manual for complete details.

To open the Password Utility:

1. Click the Start menu.
2. Enter "Password" into the search field.
3. Click "Password Utility" in the search results.
4. The Password Utility will open allowing you to set, delete or change the password.

• Set password will regsiter a user password with the computer.
• Delete allows you to delete the regsitered user password.
• Change allows you to change the regsitered user password.

When setting a password, you can apply it to the HDD. For information about this feature, click on "Learn More...".

PASSWORD UTILITY

This utility adds additional password security to your Toshiba computer. After registering a user password, you will be required to input it when booting the computer or starting the Password Utility. Refer to your Owner's Manual for complete details.

To open the Password Utility:

1. Click the Start menu.
2. Enter "Password" into the search field.
3. Click "Password Utility" in the search results.
4. The Password Utility will open allowing you to set, delete or change the password.

• Set password will regsiter a user password with the computer.
• Delete allows you to delete the regsitered user password.
• Change allows you to change the regsitered user password.

When setting a password, you can apply it to the HDD. For information about this feature, click on "Learn More...".

Change History

• Updated the Embedded Controller (EC) to version 1.20 to fix a condition where the battery cannot be charged once it is over-discharged. (Note: The EC will be updated when the BIOS update is performed.)

• Updated the microcode to M01406C3357.
• Fixed a battery capacity offset issue in Windows 10.

• Initial production release for these models.

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop.
2. Save all work in progress and close open applications.
3. Connect the AC Adapter and ensure the battery is fully charged.
4. Format the USB Flash Drive using the FAT32 file system.
5. Unzip the file and copy all the contents to the root of the USB Flash Drive.
6. Power-down the system, then press the Volume "+" button and the Power button simultaneously to enter the Boot Menu.
7. Press the Volume "+" and "-" buttons to select the USB Flash Drive then press the Windows key to enter the UEFI shell.
8. Wait 5 seconds or press the Windows key to start the upgrade process.
9. If the update does not start: Type "fs1:" then press Enter. Type "UBIOS64" then press Enter again.
10. The computer will automatically reboot after the update has completed.

Change History

• Updated the Embedded Controller (EC) to version 1.20 to fix a condition where the battery cannot be charged once it is over-discharged. (Note: The EC will be updated when the BIOS update is performed.)

• Updated the microcode to M01406C3357.
• Fixed a battery capacity offset issue in Windows 10.

• Initial production release for these models.

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop.
2. Save all work in progress and close open applications.
3. Connect the AC Adapter and ensure the battery is fully charged.
4. Format the USB Flash Drive using the FAT32 file system.
5. Unzip the file and copy all the contents to the root of the USB Flash Drive.
6. Power-down the system, then press the Volume "+" button and the Power button simultaneously to enter the Boot Menu.
7. Press the Volume "+" and "-" buttons to select the USB Flash Drive then press the Windows key to enter the UEFI shell.
8. Wait 5 seconds or press the Windows key to start the upgrade process.
9. If the update does not start: Type "fs1:" then press Enter. Type "UBIOS64" then press Enter again.
10. The computer will automatically reboot after the update has completed.

Change History

• Updated the Trusted Execution Engine (TXE) Firmware to 2.0.1.2084.
• Updated the microcode to M01406C3358.

• Updated the Embedded Controller (EC) to version 1.20 to fix a condition where the battery cannot be charged once it is over-discharged. (Note: The EC will be updated when the BIOS update is performed.)

• Updated the microcode to M01406C3357.
• Fixed a battery capacity offset issue in Windows 10.

• Initial production release for these models.

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop.
2. Save all work in progress and close open applications.
3. Connect the AC Adapter and ensure the battery is fully charged.
4. Format the USB Flash Drive using the FAT32 file system.
5. Unzip the file and copy all the contents to the root of the USB Flash Drive.
6. Power-down the system, then press the Volume "+" button and the Power button simultaneously to enter the Boot Menu.
7. Press the Volume "+" and "-" buttons to select the USB Flash Drive then press the Windows key to enter the UEFI shell.
8. Wait 5 seconds or press the Windows key to start the upgrade process.
9. If the update does not start: Type "fs1:" then press Enter. Type "UBIOS64" then press Enter again.
10. The computer will automatically shut down or reboot after the update has completed.

Change History

• Updated the Trusted Execution Engine (TXE) Firmware to 2.0.1.2084.
• Updated the microcode to M01406C3358.

• Updated the Embedded Controller (EC) to version 1.20 to fix a condition where the battery cannot be charged once it is over-discharged. (Note: The EC will be updated when the BIOS update is performed.)

• Updated the microcode to M01406C3357.
• Fixed a battery capacity offset issue in Windows 10.

• Initial production release for these models.

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop.
2. Save all work in progress and close open applications.
3. Connect the AC Adapter and ensure the battery is fully charged.
4. Format the USB Flash Drive using the FAT32 file system.
5. Unzip the file and copy all the contents to the root of the USB Flash Drive.
6. Power-down the system, then press the Volume "+" button and the Power button simultaneously to enter the Boot Menu.
7. Press the Volume "+" and "-" buttons to select the USB Flash Drive then press the Windows key to enter the UEFI shell.
8. Wait 5 seconds or press the Windows key to start the upgrade process.
9. If the update does not start: Type "fs1:" then press Enter. Type "UBIOS64" then press Enter again.
10. The computer will automatically shut down or reboot after the update has completed.

Change History

• Fixed: The Secure Boot help text is truncated.
• Fixed: The touch app cannot be used in shell mode.
• Updated the Trusted Execution Engine (TXE) to 2.0.1.2091.

• Updated the Trusted Execution Engine (TXE) Firmware to 2.0.1.2084.
• Updated the microcode to M01406C3358.

• Updated the Embedded Controller (EC) to version 1.20 to fix a condition where the battery cannot be charged once it is over-discharged. (Note: The EC will be updated when the BIOS update is performed.)

• Updated the microcode to M01406C3357.
• Fixed a battery capacity offset issue in Windows 10.

• Initial production release for these models.

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop.
2. Save all work in progress and close open applications.
3. Connect the AC Adapter and ensure the battery is fully charged.
4. From the Windows Desktop, run the downloaded file to start the installation.
5. Press the Start button at the Toshiba Archive Extractor window.
6. If a User Account Control window is displayed, press Yes.
7. An InsydeFlash window will appear, then a caution screen will be displayed. Verify all conditions are met then press OK
8. After the update has completed, the system will automatically reboot.

Change History

• Fixed: The Secure Boot help text is truncated.
• Fixed: The touch app cannot be used in shell mode.
• Updated the Trusted Execution Engine (TXE) to 2.0.1.2091.

• Updated the Trusted Execution Engine (TXE) Firmware to 2.0.1.2084.
• Updated the microcode to M01406C3358.

• Updated the Embedded Controller (EC) to version 1.20 to fix a condition where the battery cannot be charged once it is over-discharged. (Note: The EC will be updated when the BIOS update is performed.)

• Updated the microcode to M01406C3357.
• Fixed a battery capacity offset issue in Windows 10.

• Initial production release for these models.

Installation Instructions

1. Save this file to a convenient location such as the Windows Desktop.
2. Save all work in progress and close open applications.
3. Connect the AC Adapter and ensure the battery is fully charged.
4. From the Windows Desktop, run the downloaded file to start the installation.
5. Press the Start button at the Toshiba Archive Extractor window.
6. If a User Account Control window is displayed, press Yes.
7. An InsydeFlash window will appear, then a caution screen will be displayed. Verify all conditions are met then press OK
8. After the update has completed, the system will automatically reboot.