TOSHIBA SATELLITE PRO L450-EZ1522

Datum: September 21st, 2013

Um den Treiber für TOSHIBA SATELLITE PRO L450-EZ1522 herunterzuladen für Windows, Non-OS, Windows 8.1 (64), Windows 8.1 (32), Windows 8 (64), Windows 8 (32), Windows 7 (64), Windows 7 (32), Windows Vista (64), Windows Vista, Windows XP, Other, drücken Sie auf „Download“. Wenn Sie den Treiber oder die Firmware anderer Versionen, dann sollten Sie uns eine Anfrage zum Treiber schicken. Wenn Sie irgendwelche Fragen zu diesem Treiber haben, wenden Sie sich bitte mit diesem Kontaktformular an uns. Ebenso können Sie auf dieser Seite die Besonderheiten der Installation, Deinstallation und Aktualisierung dieses Treibers besprechen.

Modell:
L450-EZ1522
Hersteller:
Toshiba
Gerätetyp:
Notebooks & Netbooks / Satellite Pro
Lizenz:
Kostenlos

Windows Non-OS

Windows

Dateityp: Anwedung
Version: 1.1.0.0b
Grösse: 3.73 Mb
Betriebssystem: Windows XP
Toshiba Utilities provide the HWSetup application and the FnEsse task switcher application. Requires Toshiba ACPI Common Modules (TVALD).
Dateityp: Anwedung
Version: 2.1.0.1
Grösse: 9.66 Mb
Betriebssystem: Windows 7 (32), Windows XP
Dateityp: Anwedung
Version: 2.1.0.1
Grösse: 9.66 Mb
Betriebssystem: Windows 7 (64)
2.1.0.1 for x64
1.To install or uninstall this software, logon with Administrator user privilege.
2.How to install new version when an old one has been already installed in your system: 1Uninstall the old version from “Control Panel” and reboot the system. 2)Install the new version.
3.TOSHIBA Disc Creator uses Windows Media Player(WMP) to gather titles for the songs on the music CDs. When WMP is not installed or configured, the function which displays the music name of CD does not work.
Dateityp: Anwedung
Version: 2.1.0.1
Grösse: 18.66 Mb
Betriebssystem: Windows 7 (32), Windows Vista, Windows XP
Dateityp: Driver
Version: 1.40.40
Grösse: 50.3 Mb
Betriebssystem: Windows XP
Windows NT Advanced Power Management Subsystem version 2.05.33.
This version is updated to eliminate a CPU speed change while playing sounds.

Notes:

  1. If the previous version is installed in the system, uninstall it and reboot the PC before installing the new one.
  2. When applying the WindowsNT Service Pack, fist uninstall Toshiba Power Management (TPM), apply Service Pack, then re-install TPM. Note that TPM was certified on SP3 & SP4 & SP5 & SP6 only, so there is no assurance that it will work with future versions of Service Pack.
  3. The capability to resume PC cards after resuming depends on the HotSwap function of CardWizard and HotSwappable drivers. This capability does not work without them.
  4. Suspend request will be rejected by CardWizard when a non-HotSwappable card or ATA with open handle are in use.
  5. The system will be put into instant security mode but not actual suspend mode, when it is docked with a docking station(DS) and expansion station(EXP) and media docker(MD). This is because the option cards and SCSI in DS and EXP and MD do not support TPM. Actual suspend will cause loss of network connection and incorrect action by the SCSI device.
  6. System Auto Off does not work if Auto Run is enabled. Auto Run causes periodic interrupt, due to accessing the CD-ROM, and it prevents detection of system idle. Some unknown software may prevent System Auto Off from functioning for the same reason, even if the system appears to be idle.
  7. Ring resume function is supported with the internal modem only. It does not work with PC card modems.
Dateityp: Anwedung
Version: 1.00.2518
Grösse: 21.35 Mb
Betriebssystem: Windows 7 (32), Windows XP
Dateityp: Anwedung
Version: 1.00.2518
Grösse: 21.35 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Driver
Version: 6.0.1.5904
Grösse: 69.52 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Driver
Version: 5.10.0.5904
Grösse: 69.52 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 2.40 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Dateityp: Driver
Version: 6.40.04(T)
Grösse: 69.58 Mb
Betriebssystem: Windows XP
Toshiba Windows 2000 Supplemental Guide version 1.0 for Satellite Pro 4260/4280.
Dateityp: Anwedung
Version: 7.00.10(T)
Grösse: 75.26 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows Vista (64), Windows XP
Dateityp: Anwedung
Version: 1.1.1.4
Grösse: 28.77 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows Vista (64), Windows XP
Dateityp: Anwedung
Version: 1.1.1.6
Grösse: 28.78 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows XP
Dateityp: Driver
Version: 6.0.6000.86
Grösse: 9 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 2.60 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.60  07-27-2000

  • Corrected an infrequent problem that slowed the speed of a system reboot, when the reset switch was used.
  • Corrected a problem when running Windows ME, that would cause the system to hang when suspending/resuming the computer after switching Step Speed.
  • Fixed an issue that caused one line on the right side of the display to not be seen, when the CRT setting was 1600x1200 at 75Hz.

Version 2.50  08-02-2000

  • Corrected a problem where the computer would not see the FDD when running under Windows 95, causing the computer to hang. This problem would only occur on computers manufactured with a PCB containing the Super I/O chip.

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Dateityp: Anwedung
Version: 6.1.7100.30098
Grösse: 9.36 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Anwedung
Version: 6.1.7100.30101
Grösse: 12.41 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Driver
Version: 9.0.0.1011
Grösse: 4.17 Mb
Betriebssystem: Windows XP
Windows NT Advanced Power Management Subsystem version 2.05.33.
This version is updated to eliminate a CPU speed change while playing sounds.

Notes:

  1. If the previous version is installed in the system, uninstall it and reboot the PC before installing the new one.
  2. When applying the WindowsNT Service Pack, fist uninstall Toshiba Power Management (TPM), apply Service Pack, then re-install TPM. Note that TPM was certified on SP3 & SP4 & SP5 & SP6 only, so there is no assurance that it will work with future versions of Service Pack.
  3. The capability to resume PC cards after resuming depends on the HotSwap function of CardWizard and HotSwappable drivers. This capability does not work without them.
  4. Suspend request will be rejected by CardWizard when a non-HotSwappable card or ATA with open handle are in use.
  5. The system will be put into instant security mode but not actual suspend mode, when it is docked with a docking station(DS) and expansion station(EXP) and media docker(MD). This is because the option cards and SCSI in DS and EXP and MD do not support TPM. Actual suspend will cause loss of network connection and incorrect action by the SCSI device.
  6. System Auto Off does not work if Auto Run is enabled. Auto Run causes periodic interrupt, due to accessing the CD-ROM, and it prevents detection of system idle. Some unknown software may prevent System Auto Off from functioning for the same reason, even if the system appears to be idle.
  7. Ring resume function is supported with the internal modem only. It does not work with PC card modems.
Dateityp: Anwedung
Version: 9.1.1.1019
Grösse: 4.58 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Driver
Version: 8.9.0.1023
Grösse: 23.45 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows Vista (64), Windows XP
Install Intel Chipset SW component before this component.
Dateityp: Driver
Version: 1093.2.1217.2010
Grösse: 13.43 Mb
Betriebssystem: Windows XP
This is the driver for the Wireless LAN controller. This driver is needed for the device to function properly.

Changes From Previous Version

  1. Improved intermittent disconnects from Meru access points.

Installation Instructions

  1. Save this file to a convenient location such as the Windows Desktop.
  2. Save all work in progress and close open applications.
  3. Double-click the downloaded file icon.
  4. Answer the remaining prompts to complete the installation.
  5. Restart the computer.

Driver Version Verification

  1. Run Control Panel.
  2. Double-click System.
  3. Click the Hardware Tab.
  4. Click Device Manager.
  5. Double-click Network Adapters, then double-click Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC
  6. Select the Driver tab and verify that the driver version is V1093.2.1217.2010.

Dateityp: Driver
Version: 5.708.1030.2008
Grösse: 6.49 Mb
Betriebssystem: Windows XP
Toshiba Windows NT APM Subsystem version 2.05.27.
Dateityp: Driver
Version: 7.003.0522.2009
Grösse: 7.26 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Driver
Version: 2.2.97
Grösse: 3.31 Mb
Betriebssystem: Windows 7 (32), Windows XP
2.2.97(SM2297ALD05)
Dateityp: Driver
Version: 2.1.77
Grösse: 3.22 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows XP
version: 2.1.77(SM2177ALD06)
Dateityp: Driver
Version: 2.2.97
Grösse: 3.31 Mb
Betriebssystem: Windows 7 (32)
ACPI Flash BIOS version 1.40 for Satellite Pro 4260/4280.

CHANGE HISTORY

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Dateityp: Driver
Version: 2.2.97
Grösse: 3.38 Mb
Betriebssystem: Windows 7 (64)
Version: 2.2.97(SM2297ALS05)
LSI Modem Driver (not include Region Select Utility) inf check & check HWID in setup.exe Please do following step when you setup modem module 1)run MDSegSet (If you have not used MDREGSET, please make telephonyLocation.) 2)run modem setup 3)run RegionSelect Utility setup
Dateityp: Driver
Version: 7.x5.303.117
Grösse: 26 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Driver
Version: 7.x5.303.117
Grösse: 26 Mb
Betriebssystem: Windows XP
Windows Utilities provide the FnEsse and HWSetup applications.
Dateityp: Driver
Version: 13.2.6.1
Grösse: 28.89 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Driver
Version: 13.2.6.1
Grösse: 28.89 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Driver
Version: 13.2.6.1
Grösse: 28.89 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 2.50 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.50  08-02-2000

  • Corrected a problem where the computer would not see the FDD when running under Windows 95, causing the computer to hang. This problem would only occur on computers manufactured with a PCB containing the Super I/O chip.

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Dateityp: Anwedung
Version: 8.634.1
Grösse: 111.23 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
version: 8.634.1-090729a-086065C-Toshiba
Dateityp: Driver
Version: 6.14.10.4953
Grösse: 21.27 Mb
Betriebssystem: Windows XP
Windows 95 PCMCIA.INF file version 1.2.
Dateityp: Driver
Version: 8.15.10.1883
Grösse: 26.69 Mb
Betriebssystem: Windows 7 (64)
Dateityp: Driver
Version: 8.15.10.1883
Grösse: 26.15 Mb
Betriebssystem: Windows 7 (32)
Windows 2000 FDC Driver version 1.0-RC2.
Dateityp: Driver
Version: 7.7.0.348.2.x32_wCAT
Grösse: 20.81 Mb
Betriebssystem: Windows XP
Windows 98 NDIS driver version 1.45 for MSIR (Microsoft Infrared) 3.0.
Dateityp: Driver
Version: 1.0.0.196.0
Grösse: 21.82 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
1.0.0.196.0.s3264_wCAT
Dateityp: Driver
Version: 12.4.0.21.1.x32_wCAT
Grösse: 6.41 Mb
Betriebssystem: Windows XP
Windows Me Sound Driver version 5.12.01.2229 for Yamaha DS-XG sound system.
Dateityp: Driver
Version: 12.4.1.11.0
Grösse: 4.43 Mb
Betriebssystem: Windows 7 (32)
Windows NT Sound driver version 4.00.1233 for Yamaha DS-XG sound system.
Dateityp: Driver
Version: 12.4.1.11.0.s64_wCAT
Grösse: 5.01 Mb
Betriebssystem: Windows 7 (64)
ACPI Flash BIOS version 2.00 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Dateityp: Driver
Version: 2007.1.1002.2009
Grösse: 18.29 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
This driver is for computers configured with the Realtek RTL8191SE Wireless LAN adapter.Before downloading this driver package, please verify the type of Wireless LAN adapter that is in your computer.
  • Run Device Manager.
  • Double-click Network Adapters, and verify that Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC is listed
  • .
If a Wireless LAN adapter other than the Realtek RTL8191SE is in your computer, this driver should not be downloaded.

Changes From Previous Version

  1. Fixed: The Wireless LAN card stops working and can not be detected by the system.

Installation Instructions

  1. Save this file to a convenient location such as the Windows Desktop
  2. Save all work in progress and close open applications.
  3. Double-click the downloaded file icon to start the installation.
  4. Click OK, Unzip then OK again.
  5. Click Yes if a User Account Control window is displayed.
  6. Click Next, then click Install.
  7. Click Finish.
  8. Restart the computer.

Version Verification

  1. Run Device Manager.
  2. Double-click Network Adapters, then double-click Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC.
  3. Select the Driver tab and verify that the driver version is 2007.1.1002.2009.

Dateityp: Driver
Version: 2.00.0005_090623
Grösse: 22.93 Mb
Betriebssystem: Windows XP
Windows 95/98 Sound Driver version 4.12.01.2015 for Yamaha DS-XG sound system.
Dateityp: Driver
Version: 2.00.0006
Grösse: 20.5 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
2.00.0006.L_090829
Dateityp: Anwedung
Version: 2.1.45
Grösse: 12.83 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows XP
This software will notify you when new software or driver upgrades are available.


Change points from the last released version (2.1.40):

  1. Fixed: Toshiba Service Station crashes causing the "Service Station has stopped working" error message.
  2. Added Chinese translations.
  3. Added code to downsize the TSS window when it is too large to fit in the display.

Installation Instructions

  1. Save this file to a convenient location such as the Windows Desktop
  2. Save all work in progress and close open applications.
  3. On the Windows Desktop, double-click the downloaded file to start the installation.
    1. If a User Account Control message is displayed, click Continue.
    2. Answer the displayed prompts to complete the installation.
    3. Restart the computer.

Dateityp: Anwedung
Version: 2.1.51
Grösse: 12.8 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: BIOS
Version: 1.00
Grösse: 5.69 Mb
Betriebssystem: Windows XP

Change History

  • Version 1.00 - 2009-09-11
    • Initial production BIOS for these models.
Dateityp: BIOS
Version: 1.10
Grösse: 3.64 Mb
Betriebssystem: Windows XP

Change History

  • Version 1.10 - 2009-10-20
    • Added a workaround for a Realtek WLAN driver issue.
    Version 1.00 - 2009-09-11
    • Initial production BIOS for these models.
Dateityp: BIOS
Version: 1.20
Grösse: 4.63 Mb
Betriebssystem: Windows XP

Change History

  • Version 1.20 - 2009-10-30
    • Added support for a new second source BIOS ROM.
    Version 1.10 - 2009-10-20
    • Added a workaround for a Realtek WLAN driver issue.
    Version 1.00 - 2009-09-11
    • Initial production BIOS for these models.
Dateityp: BIOS
Version: 1.30
Grösse: 5.69 Mb
Betriebssystem: Windows XP

Change History

  • Version 1.30 - 2009-12-11
    • Updated the Computrace function to support DDR3 memory modules.
    Version 1.20 - 2009-10-30
    • Added support for a new second source BIOS ROM.
    Version 1.10 - 2009-10-20
    • Added a workaround for a Realtek WLAN driver issue.
Dateityp: BIOS
Version: 1.50
Grösse: 5.72 Mb
Betriebssystem: Windows XP

Release Notes

  • After the update completes, the computer will automatically shut down or restart.
  • Power on the computer if it is off.
  • While the "Toshiba" LOGO is displayed, press the F2 function key to start BIOS Setup.
  • Check the version of BIOS and press the F9 function key then Enter to load setup defaults.
  • Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot.

Change History

  • Version 1.50 - 2010-05-22
    • Disabled a SMART-related message during POST.
    Version 1.30 - 2009-12-11
    • Updated the Computrace function to support DDR3 memory modules.
    Version 1.20 - 2009-10-30
    • Added support for a new second source BIOS ROM.
    Version 1.10 - 2009-10-20
    • Added a workaround for a Realtek WLAN driver issue.
    Version 1.00 - 2009-09-11
    • Initial production BIOS for these models.
Dateityp: Driver
Version: 8.0.0.258.0
Grösse: 21.91 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Version: 8.0.0.258.0.s3264_wCAT
Dateityp: Driver
Version: 2.2.97
Grösse: 3.38 Mb
Betriebssystem: Windows 7 (64)
ACPI Flash BIOS version 1.80 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD.
Dateityp: Anwedung
Version: 1.5.06.0
Grösse: 73.23 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)

BULLETIN BOARD

Bulletin Board is a convenient place to pin things to visually organize in a fun and creative way. Simply drag-and-drop your favorite pictures, files, or notes to pin them on the Board. Easily accessible from your desktop - use it to create thumbnail shortcuts, reminders, to-do lists, etc., according to your personal style.

Toshiba Bulletin Board is like a customized mini homepage that keeps you on top of your busy life. Just drag, drop and pin your important pictures, files, notes, letters and links onto your board. No more searching endlessly through folders. It’s all right there in front of you. Then, just as easily “unpin” and remove them when the job’s done, or you want a different look.

From the Toshiba board, you can quickly access key utilities, programs and special offers like Toshiba Online back-up. Get alert messages for product updates and special offers. Or instantly enter our support center when you need help. Because your time is precious, it’s time you started using Toshiba Bulletin Board.

To open TOSHIBA Bulletin Board:

  1. Click the Start menu.
  2. Enter "Bulletin" into the search field.
  3. Click "Bulletin Board" in the search results.
  4. The TOSHIBA Board will open.
  5. Two screens will be available. One displaying computer and program information (shown above), the second is the screen you can pin tasks, files, etc... as described above.
  6. To learn more about Toshiba Bulletin Board, click the question mark icon in the upper Right of the screen.

CLICK HERE for additional information about Toshiba Bulletin Board.

Dateityp: Anwedung
Version: 1.5.08.0
Grösse: 65.4 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)

REEL TIME

Toshiba ReelTime™ is a graphical history/indexing tool that enables you to view recently accessed files in a fun and easy-to-use format. View and scroll through your history of opened or imported files via thumbnails in an intuitive user interface. Your ReelTime display can be customized to suit your user preferences.

Toshiba ReelTime™ replaces the old fashioned “hunt-and-click” method of finding your files with an visual timeline or “reel,” Now, instead of questions like, “Where is it?” you simply ask “When did I use it?” You’ll spend less time searching, more time doing and enjoying, and keep your day in high gear. Toshiba ReelTime™ shows a row of your most recent files as graphic previews at the bottom of your display, making it easy to see at a glance what’s there. Flick through your reel to find the file you need. Then, keep it handy by dragging and docking it nearby. A brush of your finger or mouse is all it takes. ReelTime simplifies searching by automatically tracking and indexing the documents and programs you open. It groups them and presents them as visual thumbnails so you can easily find what you’re looking for.

Toshiba ReelTime™ also lets you cut through the clutter by filtering out the files you don’t want, and honing in on the ones you do. Group your photos, files and clips by type or by program to look at last month’s book reports, queue up video clips for posting, or to prep for building another great photo album. For all the things you want to do, Toshiba ReelTime™ saves you serious time.

To open TOSHIBA Reel Time:

  1. Click the Start menu.
  2. Enter "Reel" into the search field.
  3. Click "Reel Time" in the search results.
  4. The TOSHIBA Reel Time will open. By default "Everything" is selected, showing all of your files in chronological order. You can then choose to view documents, photos, videos, as well as other items. 
  5. To learn more about TOSHIBA Reel Time, click the question mark icon in the lower Right corner of the screen.

CLICK HERE for additional information about TOSHIBA Reel Time.

Dateityp: Driver
Version: 1.0.80.3
Grösse: 12.32 Mb
Betriebssystem: Windows 7 (32)
TOSHIBA Media Controller allows you to control your music, pictures, and videos by streaming content to any compatible device in your home.

Change Points

  1. Changes were made to improve the TOSHIBA Media Controller Digital Media Renderer (DMR) function. Version 1.0.80.3 has more logic for detecting correct/reasonable content for North American Toshiba REGZA TVs purchased in 2009, and later.

Install Instructions

  1. Save the file to the Windows Desktop.
  2. Save all work in progress and close open applications.
  3. On the Windows Desktop, double-click the downloaded file to start the installation.
  4. Click Start at the TOSHIBA Archive Extractor window.
  5. Click Yes if a User Account Control window is displayed.
  6. Click Continue to start the installer program.
  7. Click Next to start the installation, and Next again to finish.

Version Verification

  1. Open Control Panel, Programs and Features, then click Uninstall a program.
  2. Scroll down to TOSHIBA Media Controller.
  3. Verify that the version is 1.0.80.3.32.
Dateityp: Driver
Version: 1.0.80.3
Grösse: 12.34 Mb
Betriebssystem: Windows 7 (64)
TOSHIBA Media Controller allows you to control your music, pictures, and videos by streaming content to any compatible device in your home.

Change Points

  1. Changes were made to improve the TOSHIBA Media Controller Digital Media Renderer (DMR) function. Version 1.0.80.3 has more logic for detecting correct/reasonable content for North American Toshiba REGZA TVs purchased in 2009, and later.

Install Instructions

  1. Save the file to the Windows Desktop.
  2. Save all work in progress and close open applications.
  3. On the Windows Desktop, double-click the downloaded file to start the installation.
  4. Click Start at the TOSHIBA Archive Extractor window.
  5. Click Yes if a User Account Control window is displayed.
  6. Click Continue to start the installer program.
  7. Click Next to start the installation, then Finish when completed.

Version Verification

  1. Open Control Panel, Programs and Features, then click Uninstall a program.
  2. Scroll down to TOSHIBA Media Controller.
  3. Verify that the version is 1.0.80.3.
Dateityp: Anwedung
Version: 1.00.00
Grösse: 2.12 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
This is a registry patch that corrects a problem where Toshiba Utilities such as Flash Cards, Zooming, and ECO Utilities, will not work after using the Windows 7 "Restore from System Image Backup" feature.

Install Instructions

  1. Save the file to the Windows Desktop.
  2. Save all work in progress and close open applications.
  3. On the Windows Desktop, double-click the downloaded file to start the installation.
  4. Click Start at the TOSHIBA Archive Extractor window.
  5. Click Yes if a User Account Control window is displayed.
  6. The program will complete quickly.
  7. Restart the computer.
  8. Toshiba Utilities will work normally again.
Dateityp: Anwedung
Version: 2.2.14
Grösse: 13.24 Mb
Betriebssystem: Windows 7 (64), Windows Vista, Windows Vista (64), Windows XP
CLICK HERE to go to the download of a newer version of Toshiba Service Station for Windows 7/vista/XP.
CLICK HERE to go to the download of a newer version of Toshiba Service Station for Windows 8/Windows 8.1/Windows 10

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information required to perform these updates or alerts. This feature is enabled by default.

Changes in this update

  1. This update fixes Security Vulnerabilities discussed in Toshiba Service Station Security Update.

    Installation Instructions

    1. Download and save this file to a convenient location such as the Windows Desktop.
    2. Save all work in progress and close open applications.
    3. Double-click the downloaded file TC00398200D.exe to start the installation.
    4. Press the Start button at the Toshiba Archive Extractor window.
    5. Press Yes if a User Account Control message is displayed.
    6. If Toshiba Service Station 2.1.14 is applied successfully, the message below will be shown.
Dateityp: Anwedung
Version: v9.10.32T
Grösse: 81.45 Mb
Betriebssystem: Windows 8.1 (64), Windows 8.1 (32), Windows 8 (32), Windows 8 (64), Windows 7 (32), Windows 7 (64), Windows Vista, Windows Vista (64), Windows XP

This is a Bluetooth Stack for Windows by Toshiba update

Changes in this update

  1. This update fixes Security Vulnerabilities discussed in Toshiba Bluetooth Stack Security Update.

    Installation Instructions

    1. Download and save this file to a convenient location such as the Windows Desktop.
    2. Save all work in progress and close open applications.
    3. Double-click the downloaded file TC00636200a.exe to start the installation.
    4. Press the Start button at the Toshiba Archive Extractor window.
    5. Press Yes if a User Account Control message is displayed.
    6. If Bluetooth Stack for Windows by Toshiba v9.10.32(T) is applied successfully, the message below will be shown. Click Yes to restart the system.
Dateityp: Anwedung
Version: 2.2.9
Grösse: 12.79 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
This application enables your computer to periodically search for Toshiba Software updates or alerts from Toshiba that are specific to your laptop.


Change points:

  1. Fixed: System crashes after login.
  2. Improved package downloads by using the Binary Intelligent Transfer Service (BITS).
  3. Combined the Download and Install buttons.
  4. Added a Home Link to the Settings Page.
  5. Removed the Notification Level Setting.
  6. Deletes obsolete software - i.e. Software that was already downloaded and installed.
  7. Notification message improvements.

Installation Instructions

  1. Save this file to a convenient location such as the Windows Desktop
  2. Save all work in progress and close open applications.
  3. On the Windows Desktop, double-click the downloaded file to start the installation.
  4. Answer the displayed prompts to complete the installation.

Dateityp: Anwedung
Version: 1.1.1.9
Grösse: 28.79 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows Vista (64), Windows XP
Dateityp: Dienstprogramm
Version: 1.62.0.6C
Grösse: 8.82 Mb
Betriebssystem: Windows XP
This software is the foundation for the other Toshiba-provided Win2k Utilities, and must be installed first.
Dateityp: Dienstprogramm
Version: 3.00.09_O
Grösse: 3.97 Mb
Betriebssystem: Windows 7 (64)
Toshiba Windows NT Docking Service version 3.0-RC2.
Dateityp: Dienstprogramm
Version: 2.01.11_O
Grösse: 3.93 Mb
Betriebssystem: Windows 7 (32)
Toshiba Power Saver Utility version 4.00.00
Dateityp: Dienstprogramm
Version: 1.03.00_O
Grösse: 3.37 Mb
Betriebssystem: Windows XP
Logitech MouseWarex, 2000.
Dateityp: Dienstprogramm
Version: 1.03.00upd4
Grösse: 3.1 Mb
Betriebssystem: Windows XP
Windows 2000 Sound Driver version 4.10.2224 for Yamaha DS-XG sound system.
Dateityp: Anwedung
Version: 4.04
Grösse: 4.44 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows Vista (64), Windows XP
Bluetooth Monitor supports Microsoft Bluetooth Stack. This software is not needed if using the Toshiba Bluetooth Stack.

***NOTE*** This software package is part of the pre-installed software for the applicable products.
Dateityp: Driver
Version: 5.90.17
Grösse: 69.24 Mb
Betriebssystem: Windows XP
Toshiba Windows 95 Infrared Driver version 1.30.
Dateityp: Anwedung
Version: 8.0.23
Grösse: 45.63 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Anwedung
Version: 8.0.23
Grösse: 45.62 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Dienstprogramm
Version: 1.62.0.3C
Grösse: 17.09 Mb
Betriebssystem: Windows XP
Windows 98 PCMCIA.INF file version 1.0-RC2 for Satellite 2615/2655.
Dateityp: Anwedung
Version: 3.2.11
Grösse: 11.25 Mb
Betriebssystem: Windows XP
Dateityp: Dienstprogramm
Version: 1.1.0.0b
Grösse: 3.54 Mb
Betriebssystem: Windows XP
Toshiba Windows 95 Infrared Driver version 1.30.
Dateityp: Dienstprogramm
Version: 1.62.0.3C
Grösse: 8.52 Mb
Betriebssystem: Windows XP
Dateityp: Dienstprogramm
Version: 1.1.11.0
Grösse: 14.19 Mb
Betriebssystem: Windows 7 (32)
Windows Utilities provide the FnEsse and HWSetup applications.
Dateityp: Dienstprogramm
Version: 1.1.11.64
Grösse: 14.52 Mb
Betriebssystem: Windows 7 (64)
This driver exposes system information to DMI-enabled applications.
Dateityp: Dientprogramm
Version: 1.01
Grösse: 15.25 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows Vista (64)
1. Ext. Screen orientation - Rotates the screen of your external monitor. This functionality is available if your computer is a tablet PC and when you have connected a external monitor to your computer.
2. Lock Computer - Locks the computer.
3. TOSHIBA Assist - Launches the TOSHIBA Assist if it exists.

Screen rotation should be performed when the Colors of a external monitor is Medium (16 bit). If the colors is Highest (32 bit), the screen will become black when the rotation is performed.
Dateityp: Anwedung
Version: 3.1.1
Grösse: 114.62 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Dientprogramm
Version: 1.63.0.4C
Grösse: 9.39 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows Vista (64)
Dateityp: Dienstprogramm
Version: 1.0.0.3119C
Grösse: 3.03 Mb
Betriebssystem: Windows XP
This software is the foundation for the other Toshiba-provided utilities and power management software, and must be installed prior to installing other Toshiba software. Some Toshiba applications may refer to this as TVALD (for Toshiba Value-Added Logic Device).
Dateityp: Dienstprogramm
Version: 1.62.0.9C
Grösse: 9.55 Mb
Betriebssystem: Windows XP
Toshiba Windows NT Utilities version 1.00.10.
Dateityp: Dientprogramm
Version: 1.62.0.6C
Grösse: 8.99 Mb
Betriebssystem: Windows XP
Dateityp: Dienstprogramm
Version: 1.62.0.6C
Grösse: 8.85 Mb
Betriebssystem: Windows XP
Windows 95/98 Display Driver version 7.02.65a-01 for S3 Savage/MX display adapter.
Dateityp: Dientprogramm
Version: 1.63.0.11C
Grösse: 13.6 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows Vista (64)
Dateityp: Dienstprogramm
Version: 3.0.32.2
Grösse: 2.28 Mb
Betriebssystem: Windows XP
version: 3.0.32.2(MDRg3032205)This Utility sets telephony location based on DMI information in the computer.
Dateityp: Anwedung
Version: 1.01
Grösse: 20.11 Mb
Betriebssystem: Windows Vista, Windows Vista (64)
Dateityp: Anwedung
Version: 2.3.0.8
Grösse: 19.11 Mb
Betriebssystem: Windows 7 (64), Windows Vista, Windows Vista (64), Windows XP
2.3.0.8(RST230MAC04)
Dateityp: Anwedung
Version: 2.3.0.13
Grösse: 19.72 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows Vista (64), Windows XP
Install the modem driver prior to this utility
Dateityp: Anwedung
Version: 3.8.32.1
Grösse: 2.29 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows Vista (64), Windows XP
version: 3.8.32.1(MDRg3832101)
This utility sets telephony location based on DMI information. no GUI. for Modem software
Dateityp: Dienstprogramm
Version: 3.2.11
Grösse: 12.52 Mb
Betriebssystem: Windows XP
Toshiba Software Upgrade version 2.0. This application automatically updates device drivers and BIOS as they become available from Toshiba.
Dateityp: Dienstprogramm
Version: 1.4.1.0
Grösse: 25.63 Mb
Betriebssystem: Windows 7 (32)
Dateityp: Dienstprogramm
Version: 1.4.1.64
Grösse: 25.82 Mb
Betriebssystem: Windows 7 (64)
Windows 95 Unimodem V Drivers version 4.10.1343.01-RC5 for Tecra 8000, Portege 7000.
Dateityp: Dienstprogramm
Version: 1.62.0.6C
Grösse: 14.9 Mb
Betriebssystem: Windows XP
Windows 95 Unimodem V Drivers version 4.10.1343.01-RC5 for Tecra 8000, Portege 7000.
Dateityp: Anwedung
Version: 2.1.33
Grösse: 12.81 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64), Windows Vista, Windows Vista (64), Windows XP
Dateityp: Dienstprogramm
Version: 3.1.0.0
Grösse: 36.69 Mb
Betriebssystem: Windows 7 (32)
Windows 2000 Modem Driver version MR577ALL004 for 56k V.90 Internal Modems.
Dateityp: Driver
Version: 3.1.0.2
Grösse: 36.65 Mb
Betriebssystem: Windows 7 (32), Windows XP
This driver provides important information about the HDD and SSD devices in your computer.

Changes From Previous Version

  1. When SSD/HDD Alert (V3.1.0.2) is applied to applicable Windows 7 models, the shut down speed will improve by two to three seconds.

Installation Instructions

  1. Save this file to a convenient location such as the Windows Desktop
  2. Save all work in progress and close open applications.
  3. Double-click the downloaded file icon on the Windows Desktop.
  4. Click Start.
  5. If a User Account Control (UAC) Window is displayed, click Yes.
  6. Click Yes to confirm the upgrade.
  7. Click Next to resume, and Finish to complete the installation.

Dateityp: Dienstprogramm
Version: 3.1.64.0
Grösse: 36.83 Mb
Betriebssystem: Windows 7 (64)
Toshiba Windows 95 Utilities version W954340USB2 for Satellite Pro 4260/4280.
Dateityp: Dienstprogramm
Version: 3.1.64.2
Grösse: 36.78 Mb
Betriebssystem: Windows 7 (64)
This driver provides important information about the HDD and SSD devices in your computer.

Changes From Previous Version

  1. When SSD/HDD Alert (V3.1.64.2) is applied to applicable Windows 7 models, the shut down speed will improve by two to three seconds.

Installation Instructions

  1. Save this file to a convenient location such as the Windows Desktop
  2. Save all work in progress and close open applications.
  3. Double-click the downloaded file icon on the Windows Desktop.
  4. Click Start.
  5. If a User Account Control (UAC) Window is displayed, click Yes.
  6. Click Yes to confirm the upgrade.
  7. Click Next to resume, and Finish to complete the installation.

Dateityp: Dienstprogramm
Version: 1.62.0.5C
Grösse: 9.85 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 2.10 for Satellite Pro 4260DVD, 4280XDVD, 4280ZDVD, 4300 Series.

CHANGE HISTORY

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.40  07-18-2000

  • A Resume/Suspend problem when running Windows, 98 or 2000, that left the screen blank, after power on, was resolved.
  • A problem was resolved that caused approximately a four minute delay in power on after using Standby or Hibernation. If the computer was set to "System Standby = 1 min." or "System Hibernation = 5 min." and then power on using the power switch, the delay could occur.

Version 2.20  06-30-2000

  • Corrected a hibernation problem in Windows 95 that caused the computer not to come out of hibernation, if battery power was low.

Version 2.10  06-30-2000

  • Power management controlling power consumption and temperature has been improved.
  • An intermittent problem causing the system to hang at the Windows 2000 screen was corrected.
  • A problem was corrected that caused a BIOS upgrade impossible, due to a particular type of FDC, if the CHGBIOSA file was used to execute the upgrade in DOS mode.
  • A problem was corrected that caused the computer to hang, after setting a password on the computer and executing suspend/resume repeatedly.

Version 2.00  06-30-2000

  • Initial production release for Satellite Pro 4300 Series.
  • A change was made to support Super I/O.
  • Flat Panel enable control and Power Panel unit control were separated.
  • A problem was corrected where, under Windows 2000, if USB Wake-Up was set to "Enable", clicking the buttons on a USB mouse after the computer went into Standby, could result in the computer shutting down.
  • Corrected a problem that caused accessing the P-Code such as the HCI function was impossible, when operating an ACPI operating system.
  • Corrected a problem in Windows 98 that caused the mouse not to respond, if keys were pressed during the resume operation.
  • Corrected a stretched text problem.
  • Corrected a battery recognition problem when running Windows 2000.When a battery was attached to the computer when it was turned on, the battery was not recognized by the computer.
  • A problem was corrected that caused a lack of a "panel closed" sound to be generated, if the computer was powered on with the panel closed.
  • Corrected a hibernation problem in Windows 98. Cancelling hibernation under LCD mode could result in the computer switching displays to CRT mode.

Version 1.80  03-24-2000

  • Corrected a failure of the PLL (Phase Locked Loop) margin within the VGA BIOS.
  • Corrected a problem using display driver version v7.30.13 when running Windows 2000. LCD mode and suspending the computer would result in a white screen.
  • A problem using TV was corrected. When the TV was turned on and after setting the computer to "Monitor auto-off. the TV screen was divided into four segments.

Version 1.70  03-23-2000

  • Corrected a problem that, when running Windows 2000, attempting to switch the Speed Step after using Rusume or Hibernation was impossible.
  • A change was made to in CHIGBIOS.exe so that pressing the F12 key, after updating the BIOS, would reset the hardware settings.
  • A change was made so that the Processor Serial Number could not be changed.
  • Corrected a problem that, when running Windows 95 and rebooting in DOS mode, it would take several minutes for the computer to go into Suspend mode.
  • Corrected a problem that when LDCM is installed, and "Dynamic CPU Frequency = Always Low", the Max Speed Value of the CPU would display an incorrect value.

Version 1.60  03-13-2000

  • Corrected an intermittent hang problem when the computer attempted to resume; if the computer had a Pentium V 450MHz processor.

Version 1.50  03-09-2000

  • Corrected a screen color issue when hot docked to a Port Replicator.
  • Corrected a problem in Windows 2000 that, when using a monitor, turning on the computer after powering off with Auto-Off, then switching to LCD, caused the LCD not to display.
  • Corrected an intermittent hang of the computer. When executing "Quality 50/Texture Swapping" in 3D Bench99, in Windows 2000 the computer might hang.

Version 1.40  02-18-2000

  • A change was made so that the Speed Step function would not change the CPU clock as a countermeasure for heat build-up.
  • Corrected a problem where, when running under a slow CPU frequency, repeating Shutdown/Suspend/Hibernation may cause the computer to hang.
  • The wait time for display control at shutdown was reduced to 2ms., in accordance with factory specifications.
  • A change was made so that the "DMA Overrun Error" would not occur when executing the FDD test in the ASP diagnostics, when "USB Legacy Mode=Enable" is set.
  • Corrected a power off issue that could be caused when running Windows NT with SP4.
  • Corrected a possible problem that, when parameter block "A" in the Flash ROM sets to "FFh", the computer would not boot.
  • Corrected a problem that, when executing "Instant Security" under CRT mode or LCD/CRT simultaneous mode, could result in a distorted display image.
  • Corrected a problem that when setting the cooling method when running Windows 95/98, the settings would not be accurate.

Version 1.20  01-02-2000

  • Initial production BIOS for these models.
Dateityp: Anwedung
Version: 1.63.0.7C
Grösse: 13.35 Mb
Betriebssystem: Windows 7 (32), Windows 7 (64)
Dateityp: Driver
Version: 4.4
Grösse: 4.67 Mb
Betriebssystem: Windows XP
Dateityp: Dienstprogramm
Version: 1.62.0.5C
Grösse: 9.3 Mb
Betriebssystem: Windows XP
Windows 95/98 DVDFAST.VXD version 1.03 for Satellite 4090/4100. Improves suspend/resume time on DVD-equipped models.
Dateityp: Dienstprogramm
Version: 1.2.25
Grösse: 42.66 Mb
Betriebssystem: Windows 7 (32)
Toshiba Power Saver Utility version 4.00.00
Dateityp: Dienstprogramm
Version: 1.2.26
Grösse: 42.66 Mb
Betriebssystem: Windows 7 (32)
Dateityp: Dienstprogramm
Version: 1.2.26_64
Grösse: 44.66 Mb
Betriebssystem: Windows 7 (64)
Windows 98 PCMCIA.INF file version 1.0-RC2 for Satellite 2615/2655.
Dateityp: Anwedung
Version: 1.2.26
Grösse: 65.87 Mb
Betriebssystem: Windows 7 (32), Windows Vista
Dateityp: Dienstprogramm
Version: 8.0.0.97.1.x32_wCAT
Grösse: 29.11 Mb
Betriebssystem: Windows XP
Toshiba Hibernation Utility version 5.1
Dateityp: Dienstprogramm
Version: 12.4.0.0.3.x32
Grösse: 31.14 Mb
Betriebssystem: Windows XP
This software is the foundation for the other Toshiba-provided Win2k Utilities, and must be installed first.

Non-OS

Dateityp: BIOS
Version: 1.00
Grösse: 5.69 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 1.10
Grösse: 3.64 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 1.20
Grösse: 4.63 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 1.30
Grösse: 5.69 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 1.50
Grösse: 5.72 Mb
Betriebssystem: Other


Weitere Treiber

TOSHIBA SATELLITE PRO 410CDT
Treiber für Notebooks & Netbooks TOSHIBA SATELLITE PRO 410CDT (Other)

TOSHIBA SATELLITE PRO L550-EZ1703
Treiber für Notebooks & Netbooks TOSHIBA SATELLITE PRO L550-EZ1703 (Other)

TOSHIBA SATELLITE PRO 400CDT
Treiber für Notebooks & Netbooks TOSHIBA SATELLITE PRO 400CDT (Other)

TOSHIBA SATELLITE PRO C650-EZ1515D
Treiber für Notebooks & Netbooks TOSHIBA SATELLITE PRO C650-EZ1515D (Other)

TOSHIBA SATELLITE PRO 435CDS
Treiber für Notebooks & Netbooks TOSHIBA SATELLITE PRO 435CDS (Other)

TOSHIBA SATELLITE PRO C640-SP4019L
Treiber für Notebooks & Netbooks TOSHIBA SATELLITE PRO C640-SP4019L (Other)


Treiber anfragen

ejemplo