TOSHIBA TECRA A3-S731

Datum: September 20th, 2013

Um den Treiber für TOSHIBA TECRA A3-S731 herunterzuladen für Windows, Non-OS, Windows Vista (64), Windows Vista, Windows XP, Windows ME, Windows 98, Windows 95, Windows 2000, Other, drücken Sie auf „Download“. Wenn Sie den Treiber oder die Firmware anderer Versionen, dann sollten Sie uns eine Anfrage zum Treiber schicken. Wenn Sie irgendwelche Fragen zu diesem Treiber haben, wenden Sie sich bitte mit diesem Kontaktformular an uns. Ebenso können Sie auf dieser Seite die Besonderheiten der Installation, Deinstallation und Aktualisierung dieses Treibers besprechen.

Modell:
A3-S731
Hersteller:
Toshiba
Gerätetyp:
Notebooks & Netbooks / Tecra
Lizenz:
Kostenlos

Windows Non-OS

Windows

Dateityp: Anwedung
Version: 1.0.81029.1
Grösse: 412.38 Kb
Betriebssystem: Windows Vista, Windows XP
Toshiba BatteryCheck4 Utility
Dateityp: Anwedung
Version: 1.0.81029.1
Grösse: 223.39 Kb
Betriebssystem: Windows Vista, Windows XP
Esta utilidad determinara si la batería instalada en su computadora está eligible para reemplazo bajo la Progama Voluntario de Reemplazo de Batería.

Por favor de corer esta utilidad con privilegios administrativos.

Dateityp: Driver
Version: 10.5.1.59
Grösse: 51.01 Mb
Betriebssystem: Windows XP, Windows 2000
Intel(R) 802.11a/b/g,b/g Driver V10.5.1.59/V9.0.4.17 & PROSet V10.5.0.1 Intel(R) 802.11a/b/g,b/g Driver V10.5.1.59/V9.0.4.17 & PROSet Utility V10.5.0.1
Dateityp: Anwedung
Grösse: 667.98 Kb
Betriebssystem: Windows Vista (64)
Microsoft Hotfix KB950233-Fixes incorrect total memory reported by msinfo32.exe This is a Microsoft Hotfix intended to correct an incorrect data type used to calculate total physical memory in the the msinfo32.exe tool. This program should be run on Windows Vista 64-bit based Toshiba computers only, and will install a Microsoft update based on the knowledge base article at http://support.microsoft.com/kb/950233.
Installation of this Hotfix will correct the following MSINFO32.EXE issue:
The Microsoft System Information tool (msinfo32.exe) does not disply the amount of physical memory installed correctly in the Vista 64-bit Operating System with 4GB or more memory installed.
Hotfix Installation Instructions
Save the file to a convenient location such as the Windows Desktop.
Double-click the downloaded file to begin the update.
Dateityp: Altre
Version: 5.00.45
Grösse: 16.41 Mb
Betriebssystem: Windows XP, Windows 2000
Toshiba ConfigFree
Dateityp: Anwedung
Version: 1.12.01
Grösse: 1.28 Mb
Betriebssystem: Windows XP, Windows 2000
Toshiba Assist
Dateityp: Anwedung
Version: 1.28.3.2018C
Grösse: 6.07 Mb
Betriebssystem: Windows XP, Windows 2000
Toshiba Controls
Dateityp: Driver
Version: 71.90 Logo
Grösse: 23.45 Mb
Betriebssystem: Windows XP, Windows 2000
Windows XP/2000 Display Driver for nVidia GeForce 6xxx Display Adapters Tecra A3-S731, A3-S711, A3, A3-S611, S2, S2-S511TD
Dateityp: Driver
Version: 2.1.63
Grösse: 1.02 Mb
Betriebssystem: Windows XP
Toshiba Software Modem Driver
Dateityp: Anwedung
Version: 1.00.1121
Grösse: 751.34 Kb
Betriebssystem: Windows ME, Windows 98, Windows 2000
Toshiba Skins
Dateityp: Anwedung
Version: 1.00.1121-RC4
Grösse: 781.05 Kb
Betriebssystem: Windows XP, Windows 95, Windows 2000
Toshiba Skins
Dateityp: BIOS
Version: 1.40
Grösse: 2.27 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 1.40 for Tecra S2/A3
Change History
Version 1.40    03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20    03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.
Dateityp: BIOS
Version: 1.50
Grösse: 2.3 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 1.50 for Tecra S2/A3
Change History
Version 1.50    05-03-2005Made a change to support the HDD password function. (In Dynabook model only). Made a change to eliminate a "PCI system error on Bus/Device/Function xxxh" message when copying data to a USB 2.0 disk device in DOS. Made a change to recognize certain USB 2.0 flash devices. Previously unrecognized devices include: IO DATA - Easy Disk Platinum 1GB; SONY - USM64A 64MB; TwinMOS - 32MB; TOSHIBA - Hi speed USB2.0 256MB.
Version 1.40    03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20    03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.
Dateityp: BIOS
Version: 1.60
Grösse: 2.3 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 1.60 for Tecra S2/A3
Change History
Version 1.60 ???06-01-2005A change was made to correct serial port malfunctions that occur when the computer is docked. A change was made to correct the French description for "LCD Display Stretch". A change was made to correct FIR data transfer issues that occurred on some Celeron CPU based computers. ATI GFX L0 support was disabled. Battery information was changed. A change was made to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first. A change was made to correct intermittent situations where the computer's Power LED stays on even after the computer is turned off.
Version 1.50 ???05-03-2005Made a change to support the HDD password function. (In Dynabook model only). Made a change to eliminate a "PCI system error on Bus/Device/Function xxxh" message when copying data to a USB 2.0 disk device in DOS. Made a change to recognize certain USB 2.0 flash devices. Previously unrecognized devices include: IO DATA - Easy Disk Platinum 1GB; SONY - USM64A 64MB; TwinMOS - 32MB; TOSHIBA - Hi speed USB2.0 256MB.
Version 1.40 ???03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20 ???03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.
Dateityp: BIOS
Version: 1.70
Grösse: 2.29 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 1.70 for Tecra S2/A3
Change History
Version 1.70    06-07-2005The max graphics memory size was changed from 64MB or 96MB to 128MB, on UMA platforms with the Mobile Intel (Alviso) 915GM C1 chipset. A change was made to the EC BIOS to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first.
Version 1.60    06-01-2005A change was made to correct serial port malfunctions that occur when the computer is docked. A change was made to correct the French description for "LCD Display Stretch". A change was made to correct FIR data transfer issues that occurred on some Celeron CPU based computers. ATI GFX L0 support was disabled. Battery information was changed. A change was made to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first. A change was made to correct intermittent situations where the computer's Power LED stays on even after the computer is turned off.
Version 1.50    05-03-2005Made a change to support the HDD password function. (In Dynabook model only). Made a change to eliminate a "PCI system error on Bus/Device/Function xxxh" message when copying data to a USB 2.0 disk device in DOS. Made a change to recognize certain USB 2.0 flash devices. Previously unrecognized devices include: IO DATA - Easy Disk Platinum 1GB; SONY - USM64A 64MB; TwinMOS - 32MB; TOSHIBA - Hi speed USB2.0 256MB.
Version 1.40    03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20    03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.
Dateityp: BIOS
Version: 1.80
Grösse: 2.35 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 1.80 for Tecra S2/A3
Change History
Version 1.80    07-21-2005Made a change to a Japanese warning message string and to correct an abnormal dialog frame shift after the HDD password is entered incorrectly 3 times. Made a change to the Japanese string for the translation of "F5/F6 Change Values" and " Select Menu" within the BIOS setup menu. The Marvell LAN PXE ROM (Both 10/100M and Giga LAN) was updated to correct PXE server connection failures when using Cisco switches. Modified the PWM duty for the LP150X08-TLA2 LCD panel. Added support for the Canadian Multilingual (ANCOR) keyboard as the 4th keyboard matrix.
Version 1.70    06-07-2005The max graphics memory size was changed from 64MB or 96MB to 128MB, on UMA platforms with the Mobile Intel (Alviso) 915GM C1 chipset. A change was made to the EC BIOS to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first.
Version 1.60    06-01-2005A change was made to correct serial port malfunctions that occur when the computer is docked. A change was made to correct the French description for "LCD Display Stretch". A change was made to correct FIR data transfer issues that occurred on some Celeron CPU based computers. ATI GFX L0 support was disabled. Battery information was changed. A change was made to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first. A change was made to correct intermittent situations where the computer's Power LED stays on even after the computer is turned off.
Version 1.50    05-03-2005Made a change to support the HDD password function. (In Dynabook model only). Made a change to eliminate a "PCI system error on Bus/Device/Function xxxh" message when copying data to a USB 2.0 disk device in DOS. Made a change to recognize certain USB 2.0 flash devices. Previously unrecognized devices include: IO DATA - Easy Disk Platinum 1GB; SONY - USM64A 64MB; TwinMOS - 32MB; TOSHIBA - Hi speed USB2.0 256MB.
Version 1.40    03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20    03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.
Dateityp: BIOS
Version: 1.90
Grösse: 3.41 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 1.90 for Tecra S2/A3
Re-packaged the v1.90 downloadable file on 2005-08-05 to fix a problem installing with the Windows-based installer.
Change History
Version 1.90 ???07-29-2005Made a change to the power button "press timing" to turn on the computer in "battery-only" mode.
Version 1.80 ???07-21-2005Made a change to a Japanese warning message string and to correct an abnormal dialog frame shift after the HDD password is entered incorrectly 3 times. Made a change to the Japanese string for the translation of "F5/F6 Change Values" and " Select Menu" within the BIOS setup menu. The Marvell LAN PXE ROM (Both 10/100M and Giga LAN) was updated to correct PXE server connection failures when using Cisco switches. Modified the PWM duty for the LP150X08-TLA2 LCD panel. Added support for the Canadian Multilingual (ANCOR) keyboard as the 4th keyboard matrix.
Version 1.70 ???06-07-2005The max graphics memory size was changed from 64MB or 96MB to 128MB, on UMA platforms with the Mobile Intel (Alviso) 915GM C1 chipset. A change was made to the EC BIOS to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first.
Version 1.60 ???06-01-2005A change was made to correct serial port malfunctions that occur when the computer is docked. A change was made to correct the French description for "LCD Display Stretch". A change was made to correct FIR data transfer issues that occurred on some Celeron CPU based computers. ATI GFX L0 support was disabled. Battery information was changed. A change was made to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first. A change was made to correct intermittent situations where the computer's Power LED stays on even after the computer is turned off.
Version 1.50 ???05-03-2005Made a change to support the HDD password function. (In Dynabook model only). Made a change to eliminate a "PCI system error on Bus/Device/Function xxxh" message when copying data to a USB 2.0 disk device in DOS. Made a change to recognize certain USB 2.0 flash devices. Previously unrecognized devices include: IO DATA - Easy Disk Platinum 1GB; SONY - USM64A 64MB; TwinMOS - 32MB; TOSHIBA - Hi speed USB2.0 256MB.
Version 1.40 ???03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20 ???03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.
Dateityp: BIOS
Version: 2.10
Grösse: 3.41 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 2.10 for Tecra S2/A3
Change History
Version 2.10    08-18-2005Updated the PXE (network boot) ROM to V3.5.2.3 to improve compatibility. Added support for the Atheros MB51L Wi-Fi Adapter. A change was made to the operation of the L-Ctrl Fn Home key combination for the Japanese keyboard so the cursor would move to the beginning of the document.
Version 1.90    07-29-2005Made a change to the power button "press timing" to turn on the computer in "battery-only" mode.
Version 1.80    07-21-2005Made a change to a Japanese warning message string and to correct an abnormal dialog frame shift after the HDD password is entered incorrectly 3 times. Made a change to the Japanese string for the translation of "F5/F6 Change Values" and " Select Menu" within the BIOS setup menu. The Marvell LAN PXE ROM (Both 10/100M and Giga LAN) was updated to correct PXE server connection failures when using Cisco switches. Modified the PWM duty for the LP150X08-TLA2 LCD panel. Added support for the Canadian Multilingual (ANCOR) keyboard as the 4th keyboard matrix.
Version 1.70    06-07-2005The max graphics memory size was changed from 64MB or 96MB to 128MB, on UMA platforms with the Mobile Intel (Alviso) 915GM C1 chipset. A change was made to the EC BIOS to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first.
Version 1.60    06-01-2005A change was made to correct serial port malfunctions that occur when the computer is docked. A change was made to correct the French description for "LCD Display Stretch". A change was made to correct FIR data transfer issues that occurred on some Celeron CPU based computers. ATI GFX L0 support was disabled. Battery information was changed. A change was made to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first. A change was made to correct intermittent situations where the computer's Power LED stays on even after the computer is turned off.
Version 1.50    05-03-2005Made a change to support the HDD password function. (In Dynabook model only). Made a change to eliminate a "PCI system error on Bus/Device/Function xxxh" message when copying data to a USB 2.0 disk device in DOS. Made a change to recognize certain USB 2.0 flash devices. Previously unrecognized devices include: IO DATA - Easy Disk Platinum 1GB; SONY - USM64A 64MB; TwinMOS - 32MB; TOSHIBA - Hi speed USB2.0 256MB.
Version 1.40    03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20    03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.
Dateityp: BIOS
Version: 2.30
Grösse: 2.72 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 2.30 for Tecra S2/A3
Change History
Version 2.30    10-18-2005A change was made to correct a "no display" issue on an external monitor after a docked computer wakes from hibernation. A change was made to allow one password input to satisfy both the system and HDD password requirements, as long as both passwords are the same. A change was made so the windows login screen would be displayed on the CRT after waking from standby. A change was made to correct a mouse cursor movement issue (moves by itself at the bottom left side of the screen) following a hot undock. Version 2.30 was re-packaged on 2005-11-15 to include updated change points. If you already have v2.30 installed, there's no reason to do it again.
Version 2.10    08-18-2005Updated the PXE (network boot) ROM to V3.5.2.3 to improve compatibility. Added support for the Atheros MB51L Wi-Fi Adapter. A change was made to the operation of the L-Ctrl Fn Home key combination for the Japanese keyboard so the cursor would move to the beginning of the document.
Version 1.90    07-29-2005Made a change to the power button "press timing" to turn on the computer in "battery-only" mode.
Version 1.80    07-21-2005Made a change to a Japanese warning message string and to correct an abnormal dialog frame shift after the HDD password is entered incorrectly 3 times. Made a change to the Japanese string for the translation of "F5/F6 Change Values" and " Select Menu" within the BIOS setup menu. The Marvell LAN PXE ROM (Both 10/100M and Giga LAN) was updated to correct PXE server connection failures when using Cisco switches. Modified the PWM duty for the LP150X08-TLA2 LCD panel. Added support for the Canadian Multilingual (ANCOR) keyboard as the 4th keyboard matrix.
Version 1.70    06-07-2005The max graphics memory size was changed from 64MB or 96MB to 128MB, on UMA platforms with the Mobile Intel (Alviso) 915GM C1 chipset. A change was made to the EC BIOS to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first.
Version 1.60    06-01-2005A change was made to correct serial port malfunctions that occur when the computer is docked. A change was made to correct the French description for "LCD Display Stretch". A change was made to correct FIR data transfer issues that occurred on some Celeron CPU based computers. ATI GFX L0 support was disabled. Battery information was changed. A change was made to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first. A change was made to correct intermittent situations where the computer's Power LED stays on even after the computer is turned off.
Version 1.50    05-03-2005Made a change to support the HDD password function. (In Dynabook model only). Made a change to eliminate a "PCI system error on Bus/Device/Function xxxh" message when copying data to a USB 2.0 disk device in DOS. Made a change to recognize certain USB 2.0 flash devices. Previously unrecognized devices include: IO DATA - Easy Disk Platinum 1GB; SONY - USM64A 64MB; TwinMOS - 32MB; TOSHIBA - Hi speed USB2.0 256MB.
Version 1.40    03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20    03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.
Dateityp: BIOS
Version: 2.40
Grösse: 3.41 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 2.40 for Tecra S2/A3
Change History
Version 2.40    12-26-2005Changed to ensure the log on screen will be properly displayed when using an external monitor. Fixed an issue an issue where the PC might auto-reboot after shutting down.
Version 2.30    10-18-2005A change was made to correct a "no display" issue on an external monitor after a docked computer wakes from hibernation. A change was made to allow one password input to satisfy both the system and HDD password requirements, as long as both passwords are the same. A change was made so the windows login screen would be displayed on the CRT after waking from standby. A change was made to correct a mouse cursor movement issue (moves by itself at the bottom left side of the screen) following a hot undock. Version 2.30 was re-packaged on 2005-11-15 to include updated change points. If you already have v2.30 installed, there's no reason to do it again.
Version 2.10    08-18-2005Updated the PXE (network boot) ROM to V3.5.2.3 to improve compatibility. Added support for the Atheros MB51L Wi-Fi Adapter. A change was made to the operation of the L-Ctrl Fn Home key combination for the Japanese keyboard so the cursor would move to the beginning of the document.
Version 1.90    07-29-2005Made a change to the power button "press timing" to turn on the computer in "battery-only" mode.
Version 1.80    07-21-2005Made a change to a Japanese warning message string and to correct an abnormal dialog frame shift after the HDD password is entered incorrectly 3 times. Made a change to the Japanese string for the translation of "F5/F6 Change Values" and " Select Menu" within the BIOS setup menu. The Marvell LAN PXE ROM (Both 10/100M and Giga LAN) was updated to correct PXE server connection failures when using Cisco switches. Modified the PWM duty for the LP150X08-TLA2 LCD panel. Added support for the Canadian Multilingual (ANCOR) keyboard as the 4th keyboard matrix.
Version 1.70    06-07-2005The max graphics memory size was changed from 64MB or 96MB to 128MB, on UMA platforms with the Mobile Intel (Alviso) 915GM C1 chipset. A change was made to the EC BIOS to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first.
Version 1.60    06-01-2005A change was made to correct serial port malfunctions that occur when the computer is docked. A change was made to correct the French description for "LCD Display Stretch". A change was made to correct FIR data transfer issues that occurred on some Celeron CPU based computers. ATI GFX L0 support was disabled. Battery information was changed. A change was made to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first. A change was made to correct intermittent situations where the computer's Power LED stays on even after the computer is turned off.
Version 1.50    05-03-2005Made a change to support the HDD password function. (In Dynabook model only). Made a change to eliminate a "PCI system error on Bus/Device/Function xxxh" message when copying data to a USB 2.0 disk device in DOS. Made a change to recognize certain USB 2.0 flash devices. Previously unrecognized devices include: IO DATA - Easy Disk Platinum 1GB; SONY - USM64A 64MB; TwinMOS - 32MB; TOSHIBA - Hi speed USB2.0 256MB.
Version 1.40    03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20    03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.
Dateityp: BIOS
Version: 2.50
Grösse: 3.41 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 2.50 for Tecra S2/A3
Change History
Version 2.50    02-15-2006Corrected: Pressing the Fn F5 key combination to switch to LCD or ext. monitor, may cause a MS-WORD function to launch.
Version 2.40    12-26-2005Changed to ensure the log on screen will be properly displayed when using an external monitor. Fixed an issue an issue where the PC might auto-reboot after shutting down.
Version 2.30    10-18-2005A change was made to correct a "no display" issue on an external monitor after a docked computer wakes from hibernation. A change was made to allow one password input to satisfy both the system and HDD password requirements, as long as both passwords are the same. A change was made so the windows login screen would be displayed on the CRT after waking from standby. A change was made to correct a mouse cursor movement issue (moves by itself at the bottom left side of the screen) following a hot undock. Version 2.30 was re-packaged on 2005-11-15 to include updated change points. If you already have v2.30 installed, there's no reason to do it again.
Version 2.10    08-18-2005Updated the PXE (network boot) ROM to V3.5.2.3 to improve compatibility. Added support for the Atheros MB51L Wi-Fi Adapter. A change was made to the operation of the L-Ctrl Fn Home key combination for the Japanese keyboard so the cursor would move to the beginning of the document.
Version 1.90    07-29-2005Made a change to the power button "press timing" to turn on the computer in "battery-only" mode.
Version 1.80    07-21-2005Made a change to a Japanese warning message string and to correct an abnormal dialog frame shift after the HDD password is entered incorrectly 3 times. Made a change to the Japanese string for the translation of "F5/F6 Change Values" and " Select Menu" within the BIOS setup menu. The Marvell LAN PXE ROM (Both 10/100M and Giga LAN) was updated to correct PXE server connection failures when using Cisco switches. Modified the PWM duty for the LP150X08-TLA2 LCD panel. Added support for the Canadian Multilingual (ANCOR) keyboard as the 4th keyboard matrix.
Version 1.70    06-07-2005The max graphics memory size was changed from 64MB or 96MB to 128MB, on UMA platforms with the Mobile Intel (Alviso) 915GM C1 chipset. A change was made to the EC BIOS to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first.
Version 1.60    06-01-2005A change was made to correct serial port malfunctions that occur when the computer is docked. A change was made to correct the French description for "LCD Display Stretch". A change was made to correct FIR data transfer issues that occurred on some Celeron CPU based computers. ATI GFX L0 support was disabled. Battery information was changed. A change was made to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first. A change was made to correct intermittent situations where the computer's Power LED stays on even after the computer is turned off.
Version 1.50    05-03-2005Made a change to support the HDD password function. (In Dynabook model only). Made a change to eliminate a "PCI system error on Bus/Device/Function xxxh" message when copying data to a USB 2.0 disk device in DOS. Made a change to recognize certain USB 2.0 flash devices. Previously unrecognized devices include: IO DATA - Easy Disk Platinum 1GB; SONY - USM64A 64MB; TwinMOS - 32MB; TOSHIBA - Hi speed USB2.0 256MB.
Version 1.40    03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20    03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.
Dateityp: BIOS
Version: 2.60
Grösse: 3.42 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 2.60 for Tecra S2/A3
Change History
Version 2.60    04-19-2006Corrected: The CTRL key locks if Fn CTRL "Any Key" is pressed, and the CTRL key is released first.
Version 2.50    02-15-2006Corrected: Pressing the Fn F5 key combination to switch to LCD or ext. monitor, may cause a MS-WORD function to launch.
Version 2.40    12-26-2005Changed to ensure the log on screen will be properly displayed when using an external monitor. Fixed an issue an issue where the PC might auto-reboot after shutting down.
Version 2.30    10-18-2005A change was made to correct a "no display" issue on an external monitor after a docked computer wakes from hibernation. A change was made to allow one password input to satisfy both the system and HDD password requirements, as long as both passwords are the same. A change was made so the windows login screen would be displayed on the CRT after waking from standby. A change was made to correct a mouse cursor movement issue (moves by itself at the bottom left side of the screen) following a hot undock. Version 2.30 was re-packaged on 2005-11-15 to include updated change points. If you already have v2.30 installed, there's no reason to do it again.
Version 2.10    08-18-2005Updated the PXE (network boot) ROM to V3.5.2.3 to improve compatibility. Added support for the Atheros MB51L Wi-Fi Adapter. A change was made to the operation of the L-Ctrl Fn Home key combination for the Japanese keyboard so the cursor would move to the beginning of the document.
Version 1.90    07-29-2005Made a change to the power button "press timing" to turn on the computer in "battery-only" mode.
Version 1.80    07-21-2005Made a change to a Japanese warning message string and to correct an abnormal dialog frame shift after the HDD password is entered incorrectly 3 times. Made a change to the Japanese string for the translation of "F5/F6 Change Values" and " Select Menu" within the BIOS setup menu. The Marvell LAN PXE ROM (Both 10/100M and Giga LAN) was updated to correct PXE server connection failures when using Cisco switches. Modified the PWM duty for the LP150X08-TLA2 LCD panel. Added support for the Canadian Multilingual (ANCOR) keyboard as the 4th keyboard matrix.
Version 1.70    06-07-2005The max graphics memory size was changed from 64MB or 96MB to 128MB, on UMA platforms with the Mobile Intel (Alviso) 915GM C1 chipset. A change was made to the EC BIOS to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first.
Version 1.60    06-01-2005A change was made to correct serial port malfunctions that occur when the computer is docked. A change was made to correct the French description for "LCD Display Stretch". A change was made to correct FIR data transfer issues that occurred on some Celeron CPU based computers. ATI GFX L0 support was disabled. Battery information was changed. A change was made to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first. A change was made to correct intermittent situations where the computer's Power LED stays on even after the computer is turned off.
Version 1.50    05-03-2005Made a change to support the HDD password function. (In Dynabook model only). Made a change to eliminate a "PCI system error on Bus/Device/Function xxxh" message when copying data to a USB 2.0 disk device in DOS. Made a change to recognize certain USB 2.0 flash devices. Previously unrecognized devices include: IO DATA - Easy Disk Platinum 1GB; SONY - USM64A 64MB; TwinMOS - 32MB; TOSHIBA - Hi speed USB2.0 256MB.
Version 1.40    03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20    03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.
Dateityp: BIOS
Version: 2.70
Grösse: 3.42 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 2.70 for Tecra S2/A3
Change History
Version 2.70    08-07-2006Corrected - The computer does not automatically switch the display to the external monitor after hot-docking to an Advanced Port Replicator III Plus (PA3474U-1PRP), when the monitor is connected with a DVI-D cable. Corrected - A computer that is docked to an Advanced Port Replicator (PA3314U-1PRP) with the display panel closed will hibernate immediately after coming out of Stand-by.
Version 2.60    04-19-2006Corrected: The CTRL key locks if Fn CTRL "Any Key" is pressed, and the CTRL key is released first.
Version 2.50    02-15-2006Corrected: Pressing the Fn F5 key combination to switch to LCD or ext. monitor, may cause a MS-WORD function to launch.
Version 2.40    12-26-2005Changed to ensure the log on screen will be properly displayed when using an external monitor. Fixed an issue an issue where the PC might auto-reboot after shutting down.
Version 2.30    10-18-2005A change was made to correct a "no display" issue on an external monitor after a docked computer wakes from hibernation. A change was made to allow one password input to satisfy both the system and HDD password requirements, as long as both passwords are the same. A change was made so the windows login screen would be displayed on the CRT after waking from standby. A change was made to correct a mouse cursor movement issue (moves by itself at the bottom left side of the screen) following a hot undock. Version 2.30 was re-packaged on 2005-11-15 to include updated change points. If you already have v2.30 installed, there's no reason to do it again.
Version 2.10    08-18-2005Updated the PXE (network boot) ROM to V3.5.2.3 to improve compatibility. Added support for the Atheros MB51L Wi-Fi Adapter. A change was made to the operation of the L-Ctrl Fn Home key combination for the Japanese keyboard so the cursor would move to the beginning of the document.
Version 1.90    07-29-2005Made a change to the power button "press timing" to turn on the computer in "battery-only" mode.
Version 1.80    07-21-2005Made a change to a Japanese warning message string and to correct an abnormal dialog frame shift after the HDD password is entered incorrectly 3 times. Made a change to the Japanese string for the translation of "F5/F6 Change Values" and " Select Menu" within the BIOS setup menu. The Marvell LAN PXE ROM (Both 10/100M and Giga LAN) was updated to correct PXE server connection failures when using Cisco switches. Modified the PWM duty for the LP150X08-TLA2 LCD panel. Added support for the Canadian Multilingual (ANCOR) keyboard as the 4th keyboard matrix.
Version 1.70    06-07-2005The max graphics memory size was changed from 64MB or 96MB to 128MB, on UMA platforms with the Mobile Intel (Alviso) 915GM C1 chipset. A change was made to the EC BIOS to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first.
Version 1.60    06-01-2005A change was made to correct serial port malfunctions that occur when the computer is docked. A change was made to correct the French description for "LCD Display Stretch". A change was made to correct FIR data transfer issues that occurred on some Celeron CPU based computers. ATI GFX L0 support was disabled. Battery information was changed. A change was made to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first. A change was made to correct intermittent situations where the computer's Power LED stays on even after the computer is turned off.
Version 1.50    05-03-2005Made a change to support the HDD password function. (In Dynabook model only). Made a change to eliminate a "PCI system error on Bus/Device/Function xxxh" message when copying data to a USB 2.0 disk device in DOS. Made a change to recognize certain USB 2.0 flash devices. Previously unrecognized devices include: IO DATA - Easy Disk Platinum 1GB; SONY - USM64A 64MB; TwinMOS - 32MB; TOSHIBA - Hi speed USB2.0 256MB.
Version 1.40    03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20    03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.
Dateityp: BIOS
Version: 2.80
Grösse: 3.39 Mb
Betriebssystem: Windows XP
ACPI Flash BIOS version 2.80 for Tecra S2/A3
Change History
Version 2.80    11-01-2006The extended desktop screen mode behavior was modified on Intel UMA models to retain the primary/secondary screen settings after waking from S3 mode, based on the lid status. Updated the Lid SW status in the EC name space.
Version 2.70    08-07-2006Corrected - The computer does not automatically switch the display to the external monitor after hot-docking to an Advanced Port Replicator III Plus (PA3474U-1PRP), when the monitor is connected with a DVI-D cable. Corrected - A computer that is docked to an Advanced Port Replicator (PA3314U-1PRP) with the display panel closed will hibernate immediately after coming out of Stand-by.
Version 2.60    04-19-2006Corrected: The CTRL key locks if Fn CTRL "Any Key" is pressed, and the CTRL key is released first.
Version 2.50    02-15-2006Corrected: Pressing the Fn F5 key combination to switch to LCD or ext. monitor, may cause a MS-WORD function to launch.
Version 2.40    12-26-2005Changed to ensure the log on screen will be properly displayed when using an external monitor. Fixed an issue an issue where the PC might auto-reboot after shutting down.
Version 2.30    10-18-2005A change was made to correct a "no display" issue on an external monitor after a docked computer wakes from hibernation. A change was made to allow one password input to satisfy both the system and HDD password requirements, as long as both passwords are the same. A change was made so the windows login screen would be displayed on the CRT after waking from standby. A change was made to correct a mouse cursor movement issue (moves by itself at the bottom left side of the screen) following a hot undock. Version 2.30 was re-packaged on 2005-11-15 to include updated change points. If you already have v2.30 installed, there's no reason to do it again.
Version 2.10    08-18-2005Updated the PXE (network boot) ROM to V3.5.2.3 to improve compatibility. Added support for the Atheros MB51L Wi-Fi Adapter. A change was made to the operation of the L-Ctrl Fn Home key combination for the Japanese keyboard so the cursor would move to the beginning of the document.
Version 1.90    07-29-2005Made a change to the power button "press timing" to turn on the computer in "battery-only" mode.
Version 1.80    07-21-2005Made a change to a Japanese warning message string and to correct an abnormal dialog frame shift after the HDD password is entered incorrectly 3 times. Made a change to the Japanese string for the translation of "F5/F6 Change Values" and " Select Menu" within the BIOS setup menu. The Marvell LAN PXE ROM (Both 10/100M and Giga LAN) was updated to correct PXE server connection failures when using Cisco switches. Modified the PWM duty for the LP150X08-TLA2 LCD panel. Added support for the Canadian Multilingual (ANCOR) keyboard as the 4th keyboard matrix.
Version 1.70    06-07-2005The max graphics memory size was changed from 64MB or 96MB to 128MB, on UMA platforms with the Mobile Intel (Alviso) 915GM C1 chipset. A change was made to the EC BIOS to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first.
Version 1.60    06-01-2005A change was made to correct serial port malfunctions that occur when the computer is docked. A change was made to correct the French description for "LCD Display Stretch". A change was made to correct FIR data transfer issues that occurred on some Celeron CPU based computers. ATI GFX L0 support was disabled. Battery information was changed. A change was made to correct situations where the CTRL key locks on Japanese keyboards, when Fn CTRL Back (Home) is pressed, and the Fn key is released first. A change was made to correct intermittent situations where the computer's Power LED stays on even after the computer is turned off.
Version 1.50    05-03-2005Made a change to support the HDD password function. (In Dynabook model only). Made a change to eliminate a "PCI system error on Bus/Device/Function xxxh" message when copying data to a USB 2.0 disk device in DOS. Made a change to recognize certain USB 2.0 flash devices. Previously unrecognized devices include: IO DATA - Easy Disk Platinum 1GB; SONY - USM64A 64MB; TwinMOS - 32MB; TOSHIBA - Hi speed USB2.0 256MB.
Version 1.40    03-28-2005Updated the ATI M22/M24 Video BIOS due to Hynix VRAM blue screen issues. Made a change to correct an intermittent problem where PXE could not connect to a production line server. Made a change to correct a problem where the display will stay dark and the HDD sounds as if it is trying to boot over and over again if the supervisor password is set to "qwerty". Made a change to correct a problem where the system will not boot after the Supervisor Passwords is set. Changed the DMI information for CPU L1 cache size to 32KB. Changed the "Set HDD User Password" text in the Japanese Setup screen. Updated the Microcode for the Dothan B1 stepping CPU, revision 18. Updated the Intel Alviso memory reference code - (MRC) v1.9. Made a change so a Select Bay device (ODD, HDD, and FDD) can be safely removed while powered on. Modified the LCD panel PWM DAC value and added support for a Sharp LCD panel.
Version 1.20    03-01-2005Initial production BIOS release for Tecra S2, and Tecra A3.

Non-OS

Dateityp: BIOS
Version: 1.40
Grösse: 2.27 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 1.50
Grösse: 2.3 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 1.60
Grösse: 2.3 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 1.70
Grösse: 2.29 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 1.80
Grösse: 2.35 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 1.90
Grösse: 3.41 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 2.10
Grösse: 3.41 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 2.30
Grösse: 2.72 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 2.40
Grösse: 3.41 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 2.50
Grösse: 3.41 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 2.60
Grösse: 3.42 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 2.70
Grösse: 3.42 Mb
Betriebssystem: Other
Dateityp: BIOS
Version: 2.80
Grösse: 3.39 Mb
Betriebssystem: Other


Weitere Treiber

TOSHIBA TECRA A3
Treiber für Notebooks & Netbooks TOSHIBA TECRA A3 (Other)

TOSHIBA TECRA A3-S711
Treiber für Notebooks & Netbooks TOSHIBA TECRA A3-S711 (Other)

TOSHIBA TECRA S2-S511TD
Treiber für Notebooks & Netbooks TOSHIBA TECRA S2-S511TD (Other)

TOSHIBA TECRA A3-S611
Treiber für Notebooks & Netbooks TOSHIBA TECRA A3-S611 (Other)

TOSHIBA TECRA S2
Treiber für Notebooks & Netbooks TOSHIBA TECRA S2 (Other)

TOSHIBA TECRA R850-S8515
Treiber für Notebooks & Netbooks TOSHIBA TECRA R850-S8515 (Other)


Treiber anfragen

ejemplo